Verity for packaging companies

In packaging, the spec is the price. A box quoted wrong stays wrong for the whole run.

Every packaging job starts as a specification: size, board or film, print, finish, quantity. Quote it a little low, let wastage run a little high, miss the die that was already made, and a full order leaves the factory at a loss. Verity ties the quote, the job, the material, the tooling and the delivery to one record, so you can see what each job really earned.

Verity in one line

One system that knows every spec, every die and plate, every reel of material and every promised delivery date.

See your packaging unit in Verity See the 14 problems we solve

Free: we set up a working demo of your own business, on your own data, within 7 days. You pay only if your team decides to use it.

Built for a shop floor with machine operators, not data entry staff. Records come from the job card, the material issue and the dispatch note.

Verity / Unit / Today

Unit: Bhiwandi

Live

Jobs closed

11

this week

Average wastage

6.8%

allowance 5.5%

Deliveries due today

4

1 at risk

Overdue dues

₹38.5 lakh

6 customers

Margin per job against the quote, last 5 closed

  • JC-2281 Shah Foods+₹0.40 per pc
  • JC-2284 Pinnacle Pharma+₹0.28
  • JC-2287 Kiran Agro+₹0.04
  • JC-2290 Metro Retail-₹0.11 (loss)

Board rate is 6% above the rate used in 5 open quotes.

Review quotes
  • Delivery JC-2296 at risk for ThursdayPress 2 busy until Wednesday nightRe-plan
  • Die D-114 not returned from Kiran Agro jobLast seen on press 1Trace

Illustrative screen with sample figures. Yours is set up with your own jobs, material, tooling, deliveries and dues.

How it runs today

Most packaging units are busy and still unsure which jobs made money.

A customer sends a sample or a drawing. Someone estimates a price from experience. The order is confirmed on a call or a message. The job card goes to the floor. The estimate stays in one file and the actual cost is never put next to it.

Material is the biggest cost. Board, paper, film, ink and adhesive are bought on rates that change, issued by reel or sheet, and wasted in setup and trim. The loss is a number nobody sees per job.

Tooling is a hidden asset. A die, a printing plate or a cylinder made for one customer is needed again six months later. Where it is, whose it is and what it cost to make are often answered by asking the machine operator.

What most packaging companies run on

  • Estimate sheets in Excel
  • Job cards on paper
  • Stores register for board, film and ink
  • Accounts software
  • WhatsApp with customers, drivers and suppliers

Each works alone. The quote, the cost and the delivery are never on one page.

14 problems, one by one

Where a packaging company actually loses money.

These are the situations packaging owners and plant heads describe again and again. For each: what it looks like on an ordinary day, what it costs, and what Verity does about it.

  1. 01Quoting

    A job is quoted on feel and the real cost is never compared

    What it looks like

    A buyer asks for 20,000 printed cartons. The estimate is done from last year's similar job. The board rate has changed twice since.

    What it costs you

    Example arithmetic: a ₹6 carton quoted at ₹6.40 with actual cost of ₹6.20 earns ₹0.20 a piece, so ₹4,000 on the order. A 3 percent wastage overrun alone wipes that out.

    How Verity fixes it

    Each quote is a record built from spec, material at the latest rate, wastage allowance, tooling and conversion cost. When the job closes, Verity shows quoted against actual cost and margin by job and by customer.

    See the screen
  2. 02Production

    Wastage in setup and trim runs above the allowance

    What it looks like

    A print job takes 300 sheets to get colour right on a short run. The corrugator trim on a particular size is higher than the estimate allowed. Nobody records either.

    What it costs you

    Material is usually the largest cost in a converter. A point or two of extra wastage across all jobs is a visible dent in a thin margin.

    How Verity fixes it

    Each job records material issued, good output and waste, with a reason such as setup, trim or damage. Verity shows wastage by job, machine and operator against the allowance used in the quote.

    See the screen
  3. 03Costing

    Board and film prices move and the price list does not

    What it looks like

    Kraft paper rises, film goes up with crude, and ink changes. One trade account of the 2021 board surge reports raw material costs of corrugated box makers up by at least 70 percent in about 14 months, with converters asking brand owners to share the increase.

    What it costs you

    A box maker who cannot show a customer the cost movement on a given job has a weak case for a revision.

    How Verity fixes it

    Every purchase records its rate. Verity compares current material rates with the rate in each open quote, flags jobs where cost has moved beyond your limit, and gives the documented numbers for a price revision conversation.

    See the screen
  4. 04Tooling

    Dies, plates and cylinders are lost or made twice

    What it looks like

    A repeat order for a customer's carton needs the die made last year. It is not where the register says. A new one is made, and the old one turns up later.

    What it costs you

    A die or a set of printing plates can be a real expense, and a duplicate or a delayed job is avoidable.

    How Verity fixes it

    Each die, plate set and cylinder is an asset record with customer, spec, location, number of impressions run and what it cost. A job picks its tooling from the record and the location changes when it is issued and returned.

    See the screen
  5. 05Tooling

    Tooling cost is never charged to the customer

    What it looks like

    The die and plate cost is absorbed into the first order. A customer cancels after the first run and the tooling cost stays with you.

    What it costs you

    Unrecovered tooling is a straight loss. It also hides which customers are costly to serve.

    How Verity fixes it

    Tooling cost is recorded against the customer and the spec, with what was charged and what remains to be recovered. Verity lists tooling unrecovered by customer.

    See the screen
  6. 06Customers

    Sample approvals and artwork changes get lost

    What it looks like

    The customer changes a colour on WhatsApp after the plates are made. The approved artwork is one version, the file on the computer is another, and the operator prints from the old one.

    What it costs you

    A full reprint of a job is a direct loss, and an argument over who approved what.

    How Verity fixes it

    Each job holds the approved artwork version, the sign-off by the customer with date, and changes with who requested them. The job card shows only the approved version.

    See the screen
  7. 07Delivery

    Delivery dates are promised before the machine slot is checked

    What it looks like

    Sales confirms Thursday. The press is booked until Wednesday and the sheets have not been cut. The job moves to Saturday and the customer's line stops.

    What it costs you

    Packaging goes into the customer's own production. Lateness can halt their line, and it costs you the next order.

    How Verity fixes it

    Each job shows spec, material availability, machine slot and promised date. The planner sees conflicts before a date is committed, and late-running jobs are listed with the reason.

    See the screen
  8. 08Delivery

    Part deliveries and returns are not tracked

    What it looks like

    A customer takes 8,000 of a 20,000 order and asks for the rest in lots. Each lot has its own challan. A box batch is rejected for print quality and nobody records the quantity or the reason.

    What it costs you

    Open balances are forgotten, and rejections are argued from memory instead of from the batch.

    How Verity fixes it

    Each dispatch is recorded against the job with quantity and challan. Verity shows balance to deliver, and a rejection is a record with batch, quantity and reason, linked to the job.

    See the screen
  9. 09Quality

    Quality complaints cannot be traced to a reel or a shift

    What it looks like

    A food company complains about seal strength on a flexible pack. The reel lot, the laminator shift and the operator are not recorded on the job.

    What it costs you

    A complaint with no root cause becomes a credit note and a repeat problem.

    How Verity fixes it

    Jobs record reel and board lots issued, machine and operator, and the in-process checks. A complaint links to the job and shows the lots and shift behind it.

    See the screen
  10. 10Equipment

    Machines stop for reasons no one writes down

    What it looks like

    A printing press loses two hours a shift for plate changes, web breaks and waiting for material. The day report says output was low.

    What it costs you

    Hours lost repeat day after day because the causes are not named.

    How Verity fixes it

    Stops are recorded with reason and duration. Verity shows downtime by machine and cause, and links scheduled maintenance tasks to each machine.

    See the screen
  11. 11Money

    Customers pay slowly, and small packaging firms pay slowly too

    What it looks like

    A large buyer pays at 90 days. You pay your board supplier at 30. A small converter selling to you waits longer than it should.

    What it costs you

    Since 1 April 2024, a buyer paying a micro or small enterprise supplier beyond the agreed period, capped at 45 days, generally cannot deduct the amount until paid. If you are the small supplier, this matters to your customer. If you are the buyer, it matters to you.

    How Verity fixes it

    Invoices and supplier bills are tracked against their due dates and the 45 day limit where it applies. Verity lists overdue amounts by customer and age with the person who owns the relationship, and shows supplier bills nearing the limit.

    See the screen
  12. 12Compliance

    Packaging rules for plastic keep changing

    What it looks like

    A customer asks for your CPCB registration details on flexible packaging, or whether the pack carries the new QR code. The answer depends on who finds the certificate.

    What it costs you

    Customers who are brand owners must put registration details on their packs, and they rely on their packaging supplier for correct information. An error or a delay delays their packs.

    How Verity fixes it

    Each registration, certificate and test report is a record with its number and expiry. Jobs for regulated products carry the needed information, and Verity lists those where details are missing.

    See the screen
  13. 13Compliance

    Food-contact packaging needs records you do not have

    What it looks like

    A biscuit maker asks for proof that the board, ink and film you supply are suitable for food contact. The test reports are with the supplier or in a folder.

    What it costs you

    Without the documents, you lose food-sector customers or hold up deliveries while you search.

    How Verity fixes it

    Material lots link to supplier test reports. Verity shows, for each food-contact job, which lots were used and which reports are on file, and flags gaps.

    See the screen
  14. 14Owner

    The owner learns which jobs paid at the end of the quarter

    What it looks like

    The accountant shows margin by month. Nobody can say which customers and specs earn the most per machine hour.

    What it costs you

    Decisions about which jobs to chase or drop run on feel.

    How Verity fixes it

    One morning screen with jobs closed, margin by job and customer, material wastage, tooling at risk, deliveries due and overdue dues.

    See the screen

The numbers behind it

The numbers that make these problems worth fixing.

From published sources, with the source named under each figure. Your own numbers will differ, and showing you yours is the first thing Verity does.

  • USD 19.42 billion

    is the estimated size of India's paper packaging market in 2025 according to IMARC, which forecasts USD 28.55 billion by 2034.

    IMARC Group, India paper packaging market, 2025

  • 70%

    is the rise in raw material costs reported for corrugated case makers between January 2020 and March 2021, when converters asked brand owners for fair price revisions.

    PrintWeek India, 2021

  • 1 July 2025

    is the date from which producers, importers and brand owners must show their CPCB registration details on plastic pack through a barcode or QR code, or by one of the allowed alternatives.

    Packaging Europe, 2025

  • 45 days

    is the longest period a buyer generally has to pay a micro or small enterprise supplier before the amount is disallowed as a deduction, from 1 April 2024.

    SetIndiaBiz, MSME 45 day payment rule, 2025

Market size estimates for packaging vary widely between research firms, so only one segment figure is used and it is a vendor estimate. The 70 percent board price rise is from 2021 trade press and describes a past surge. The plastic labelling summary is from trade press; confirm the final rules with CPCB.

What you will actually see

The screens you would use every day.

Five views, each built for one job. Names, columns and terms are set up in your unit's own language.

Screen 1 of 5

The owner's morning view

Margin by job, material wastage, tooling at risk, deliveries due and overdue dues on one screen, with the items that need a decision under it. It replaces the evening call to the plant head.

Fixes

  • 11 Customers pay slowly, and small packaging firms pay slowly too
  • 14 The owner learns which jobs paid at the end of the quarter

Verity / Unit / Today

Unit: Bhiwandi

Jobs closed

11

this week

Average wastage

6.8%

allowance 5.5%

Deliveries due today

4

1 at risk

Overdue dues

₹38.5 lakh

6 customers

Margin per job against the quote, last 5 closed

  • JC-2281 Shah Foods+₹0.40 per pc
  • JC-2284 Pinnacle Pharma+₹0.28
  • JC-2287 Kiran Agro+₹0.04
  • JC-2290 Metro Retail-₹0.11 (loss)

Board rate is 6% above the rate used in 5 open quotes.

Review quotes
  • Delivery JC-2296 at risk for ThursdayPress 2 busy until Wednesday nightRe-plan
  • Die D-114 not returned from Kiran Agro jobLast seen on press 1Trace

Screen 2 of 5

Quote, job and what it actually earned

For each job, the quoted cost beside the actual material, conversion and tooling. The approved artwork, customer sign-off and the lots used sit on the same record.

Fixes

  • 01 A job is quoted on feel and the real cost is never compared
  • 06 Sample approvals and artwork changes get lost
  • 09 Quality complaints cannot be traced to a reel or a shift

Verity / Jobs and costing

Closed this week

JobCustomerQuotedActualMargin
JC-2281Shah Foods₹6.40 / pc₹6.00+₹0.40
JC-2287Kiran Agro₹14.20 / pc₹14.16+₹0.04
JC-2290Metro Retail₹3.10 / pc₹3.21-₹0.11
JC-2292Pinnacle Pharma₹9.80 / pc₹9.52+₹0.28

JC-2290 / Metro Retail, shipper carton

20,000 pcs, 3 ply, 2 colour print

Artwork
v3, approved 4 Oct
Board lot
B-8841
Wastage
8.2% vs 5.5% allowed
Tooling
Die D-142, plates P-142
Status
Loss-making
  1. 4 OctCustomer approved artwork v3
  2. 8 OctPress 2, setup waste high
  3. 10 OctDelivered in 2 lots
  4. NoteQuote used old board rate

Screen 3 of 5

Board, film and ink, and where wastage goes

Material issued against good output, wastage with its reason, and each machine's stops. Current supplier rates sit against the rates used in open quotes.

Fixes

  • 02 Wastage in setup and trim runs above the allowance
  • 03 Board and film prices move and the price list does not
  • 10 Machines stop for reasons no one writes down
  • 13 Food-contact packaging needs records you do not have

Verity / Material and wastage

Last 7 days

MaterialIssuedGood outputWasteStatus
Kraft board 180 gsm14.2 t13.1 t7.7%High
BOPP film 20 mic3.8 t3.6 t5.3%Within range
Flexo ink, cyan220 kg205 kg6.8%High

Waste reasons logged this week

  • Setup1.9 t
  • Trim1.4 t
  • Damage0.6 t
  • Machine stop0.4 t

Kraft board rate is up 6% since August. 5 open quotes still use the old rate.

Review

Screen 4 of 5

Dies, plates and cylinders, and registrations

Every die, plate set and cylinder with its customer, location, impressions run and cost recovered. Registrations and test reports have an owner and an expiry.

Fixes

  • 04 Dies, plates and cylinders are lost or made twice
  • 05 Tooling cost is never charged to the customer
  • 12 Packaging rules for plastic keep changing

Verity / Tooling and papers

By customer

ToolCustomerLocationImpressionsCost recovered
Die D-114Kiran AgroPress 162,000₹18,000 of ₹18,000
Die D-142Metro RetailRack C320,000₹4,000 of ₹22,000
Plates P-142Metro RetailRack C320,000₹0 of ₹9,500
Cylinder Y-07Pinnacle PharmaRack F11,40,000Fully recovered
Registration or reportOwnerExpiryStatus
CPCB registrationComplianceCheck dateCheck
Food-contact test, BOPP filmQuality headNovDue
Factory licenceOwnerMarOK

Screen 5 of 5

Promised dates and part deliveries

Each job against its machine slot, material and promised date. Part deliveries, balances and rejected lots sit on the job.

Fixes

  • 07 Delivery dates are promised before the machine slot is checked
  • 08 Part deliveries and returns are not tracked

Verity / Deliveries

This week

JobCustomerOrderedDeliveredPromise
JC-2296Shah Foods25,00010,000At risk
JC-2297Kiran Agro8,0000Thu
JC-2298Metro Retail40,00020,000Balance Mon
JC-2299Pinnacle Pharma12,00012,000Done

Printing2

  • JC-2297 Kiran AgroPress 1, ends Wed 6 pmOn time
  • JC-2296 Shah FoodsPress 2, waiting for boardWaiting

Finishing1

  • JC-2298 Metro RetailDie cutting, 20,000 leftRunning

Illustrative screens with sample data. Layouts, fields, names and terms are set up around how your packaging unit works.

An ordinary day

The same Tuesday, before and after.

What changes is not the board or the film. It is that each job leaves a record, and the record does the chasing.

WhenTodayWith Verity
8:30 TodayThe plant head asks each operator what ran last night. Wastage is known by feel. With VerityThe Today screen shows 11 jobs closed, wastage at 6.8 percent against 5.5, and the jobs that caused it.
10:30 TodayA buyer wants a rate for a repeat carton. The estimate is rebuilt from an old file. With VerityThe last quote and the actual cost of that job open together, with the board rate updated.
1:00 TodayA die cannot be found for a repeat order. With VerityThe die record shows rack C3 and the 20,000 impressions run.
3:30 TodaySales confirms Thursday without checking the press. With VerityThe job shows the press booked until Wednesday and a conflict is flagged before the date goes to the customer.
6:00 TodayA complaint about seal strength has no lot or shift on the job. With VerityThe job shows reel lot, machine and shift, and the check results.
Month end TodayThe accountant asks which jobs made money. With VerityMargin is already shown by job, customer and machine.

How we work with you

We set it up with you, in four weeks.

You do not get a login and a manual. We spend time on your floor, at the estimating desk and at the dispatch gate, build Verity around how your unit really runs, bring your data in, then stay to make sure it keeps working.

  1. Week 1

    Discovery and mapping

    What we do
    Spend a shift in your unit. Follow a job from enquiry and estimate to material issue, printing, finishing and delivery, and see where its cost and records are lost.
    What we need from you
    Two to three hours of yours and your plant head's. A few estimates, job cards and a month of dispatches.
    What you have at the end
    A written map of your unit: product types, how a quote is built, material and wastage allowances, tooling, machine slots, and the first gaps we will close.

  2. Weeks 2 to 3

    Configuration

    What we do
    Set up customers, specs and estimate rules, material list and rates, wastage allowances, tooling records, job cards, machine slots, delivery rules and the six screens in your own terms.
    What we need from you
    Check the setup with the estimating head and the plant head. Tell us where a rule or an allowance is wrong.
    What you have at the end
    A working Verity with your real specs, rules and people, ready for your data.

  3. Weeks 3 to 4

    Migration and training

    What we do
    Bring in your customers, open jobs, material stock, tooling list and open dues from your sheets and accounts export. Train the estimating desk, stores, machine leads, dispatch and accounts at their own stations.
    What we need from you
    Your tooling list in whatever form it exists, a stock count and the dues list. One hour with each role.
    What you have at the end
    Your unit's data inside Verity and a team that has used it through live jobs.

  4. After go-live

    Operations partnership

    What we do
    Stay on after launch. Review the first weeks of margin and wastage with you, tune allowances, and change setup when you add a machine or a product type.
    What we need from you
    A short monthly review of what the numbers say.
    What you have at the end
    A system that keeps matching how the unit runs, with someone responsible for it.

Bring these on day one

  • Your last month of estimates and job cards
  • A tooling list with customers
  • Stores register with material rates
  • The licence and registration list with dates
  • Open orders and dues

Your time

About 9 to 12 hours of your own time across the four weeks, mostly in week 1. The estimating head, plant head and accounts person need a few more.

After go-live

Nobody is hired to run Verity. Material issue, wastage and dispatch are recorded as part of work the unit already does, and the reports come from those records.

Verity AI

Ask your unit a question. Get an answer, not a report to build.

Verity AI reads your own quotes, jobs, material and tooling. Ask in plain language, then turn the answer into tasks for the right people.

  • Your records only Answers come from your own packaging companies data, not from generic knowledge.
  • Right person, right view It only shows what the person asking is allowed to see.
  • Turns into action An answer can become a task assigned to a named person.

Verity / Ask

Which customers earned us the least per piece this quarter?

Three customers are below 1 percent margin. Two of them are on quotes made before the August board rate.

  • Metro Retail-0.4%
  • Kiran Agro0.3%
  • Shah Foods0.7%

Create quote review tasks for sales

Verity / Ask

Why was wastage above allowance last week?

Setup waste on short runs on Press 2 is the main cause, followed by trim on the 3 ply size 420 by 310.

  • Setup1.9 t
  • Trim1.4 t
  • Damage0.6 t
  • Machine stop0.4 t

Verity / Ask

Which tooling is not fully recovered from the customer?

Four items totalling ₹46,500, with Metro Retail the largest.

Add tooling charge to the next quote for each customer

Sample questions and answers with illustrative figures.

Without chasing

The follow-ups nobody has time to make.

Set once, then they run from your records. Staff still talk to customers and suppliers; Verity makes sure the right person knows what to do.

When

A job closes with wastage above its allowance

  • Reason prompted from the operator
  • Task to the plant head if above limit
  • Allowance reviewed if it repeats

When

A material rate rises beyond your limit

  • Open quotes using the old rate listed
  • Task to the estimating head
  • New rate applied to quotes when approved

When

A job is created for a repeat spec

  • Previous tooling and its location shown
  • Reserved for the job
  • Location updated when issued and returned

When

A promised date conflicts with the machine slot or material

  • Flagged to the planner
  • Options shown: re-plan or part delivery
  • Customer call task to sales

When

A rejected lot is recorded

  • Linked to the job, reel lot and shift
  • Task to the quality head
  • Credit or reprint decision recorded

When

A registration or test report is 60 days from expiry

  • Task to the named owner
  • Documents needed listed
  • Next date set when done

Rules and paperwork

The rules a packaging company has to keep up with.

Verity does not give legal advice and does not file anything for you. It keeps the records these rules depend on in order, so you are not hunting for them when someone asks.

  • Plastic packaging registration and labelling

    What is expected

    Producers, importers and brand owners of plastic packaging generally register with the Central Pollution Control Board, and from 1 July 2025 must show registration details on pack through a barcode or QR code, or an allowed alternative. Whether you are a producer, a brand owner or a supplier to one depends on what you do. The rules were amended several times in 2025 and 2026, so confirm the current text.

    How Verity helps

    Registrations and certificates are records with number and expiry, and jobs for regulated products list the required details.

    Packaging Europe

  • Food-contact packaging standards

    What is expected

    FSSAI's Packaging Regulations, 2018, generally set standards for materials that touch food, including limits on migration and a bar on some recycled materials. Your food-sector customers rely on you for proof. Check the material standards for your product.

    How Verity helps

    Material lots link to supplier test reports, so each food-contact job shows what was used and which reports are on file.

  • Payment terms for micro and small suppliers

    What is expected

    From 1 April 2024, a buyer that owes a micro or small seller generally must pay within the agreed period, capped at 45 days, or the amount is not deductible until paid.

    How Verity helps

    Supplier bills and customer invoices show due dates against that limit.

    SetIndiaBiz

  • Factory, pollution and fire registrations

    What is expected

    A packaging unit generally holds a factory licence, state pollution control consent where applicable, and fire and electrical clearances, each with its own renewal date.

    How Verity helps

    Each is a record with authority, expiry and owner, and renewal tasks open weeks ahead.

Rules change and differ by product, material and state. Confirm current requirements with your consultant or the relevant authority.

Who sees what

Everyone sees the same records, through their own window.

A machine operator should not see customer margins. Sales should not change a wastage allowance. Each role opens on what it needs.

  • Owner

    Which jobs and customers pay, and what is at risk?

    Margin by job and customer, wastage, tooling not recovered, deliveries and dues.

  • Estimating head

    Is each quote built on current rates and real wastage?

    Quotes against actuals, material rate changes and open quotes affected.

  • Plant head

    What ran, what stopped and what is due?

    Machine slots, wastage, downtime, material shortages and delivery risks.

  • Stores and dispatch

    What came in, what went out and what is owed?

    Material lots, tooling locations, part deliveries and challans.

  • Accounts

    What was bought, sold and owed?

    Invoices tied to dispatches, supplier bills against due dates, and customer dues by age.

Straight answers

What changes, and what stays the same.

Keep using

  • Your accounts software. We agree during setup how invoices and payments reach Verity.
  • Your design and artwork tools. We store the approved version on the job.
  • Your testing laboratory or supplier reports. We record them against the lot.
  • WhatsApp and phone with buyers and drivers. Staff talk
  • Verity tracks who owes a reply.

Verity does not

  • Control your printing or converting machines.
  • Design artwork or structural packaging.
  • File registrations or returns for you.
  • Send messages to customers or suppliers on its own.

We bring your customers, specs, open jobs, tooling list, material stock and open dues across from the sheets, registers and accounts export you use now, in stages, so production keeps running while it happens.

  • Excel
  • Google Sheets
  • Legacy ERP
  • CRM
  • One operating environment

Questions

Questions packaging owners ask.

My operators are busy. Will they record material and waste?

Only if it takes seconds, so entry is at the material issue window and the end of each job with a few reasons to pick from. We train during live jobs and start with the records that matter most.

Can Verity tell me what each job really earned?

Yes, once quotes, material issued and wastage are recorded. Each job shows quoted against actual cost and margin, by customer and by machine.

Does it make my estimates?

It holds your estimate rules, rates and allowances and builds the quote from them. You still decide the price, and Verity shows the margin it implies.

Can it track my dies and plates?

Yes. Each is a record with customer, location, impressions run and cost recovered, and a repeat job picks it up automatically.

Does it replace my accounts software?

No. Your accounts stay where they are. We agree during setup how invoices and payments reach Verity, which then handles quotes, jobs, material, tooling and deliveries.

I run flexible packaging, not corrugated. Will it fit?

Yes. Specs, material lots, wastage, tooling and delivery work the same way. We set the fields in your own terms, such as film, lamination and reel lots.

Can I see two units together?

Yes. Each is a location in one system, with jobs, wastage, deliveries and dues side by side, and customers are the same across both.

Who can see my data?

Only the people you allow. Access is set by role, so operators, sales, estimating and accounts each see what they need, and every change is recorded with who made it and when.

How quickly will I see something useful?

The tooling list, overdue dues and material rate changes need only your existing data, so we aim to have them first. Wastage and margin patterns become reliable after a few weeks of recorded jobs.

What does it cost?

It depends on the number of units, people and what you want set up. Message us and we will give you a clear number after a short conversation about how your unit runs.

Where the figures come from

Sources

  1. IMARC Group, India paper packaging market, 2025
  2. PrintWeek India, Survival of corrugated packaging industry at stake, 2021
  3. Packaging Europe, 2025
  4. SetIndiaBiz, MSME 45 day payment rule, 2025

Last checked 16 October 2026. Published figures vary by region and method, so treat them as indicative, not as a promise of your results.

Start with the job that lost money.

Tell us how your unit runs and we will show you the quoted against actual margin, the tooling not recovered and the dues it would find, using your own numbers.

Get your free demo Email us

Free: we set up a working demo of your own business, on your own data, within 7 days. You pay only if your team decides to use it.